285 & 285A Rebated double doorset

Exidor panic set comprising of two single panic bolt units for use on plain meeting stile double doorsets. The unit is operated by pushing the bar down into the door face to retract the bolts, the bolts remain retracted until automatically released on closing of the door.

284A is supplied with adjustable shoot bolts for greater onsite flexibility. The push bar design can be easily cut to size to suit different door widths and is suited to most general-purpose non-rebated double door applications, often found in industrial applications.

Certified in compliance with EN 1125 with suitability for timber doors up to FD120 and metal doors FD120/FD240. Indicate the required finish when ordering.

Exidor push bar panic horizontal Pullman latch that is simple to install, supplied with timber or steel door keeps and fixings.

The unit is operated by pushing the pad down into the door face to retract the latch bolts, releasing the pad returns the latch bolts to the rest position.

Standard-size panic bolts are suitable for single doors up to 2440mm high. Special sizes are available on request.

Certified in compliance with EN 179 with suitability for timber doors up to FD120 and metal doors FD120/FD240.  Indicate the required finish when ordering.

Exidor rebated double panic doorset comprising horizontal Pullman and vertical Pullman latches operated by push bar that is simple to install, supplied with timber or steel door keeps and fixings.

The unit is operated by pushing the bar down into the door face to retract the latch bolts, releasing the bar returns the latch bolts to the rest position.

Standard-size panic bolts are suitable for single doors up to 1220mm wide and 2440mm high (special sizes are available on request). Certified in compliance to EN 1125 with suitability for use on timber doors up to FD120 as well as metal doors FD120/FD240.

Indicate required finish when ordering.

Exidor push bar panic vertical Pullman latch that is simple to install, supplied with timber or steel door keeps and fixings.

The unit is operated by pushing the pad down into the door face to retract the latch bolts, releasing the pad returns the latch bolts to the rest position.

Standard-size panic bolts are suitable for single doors up to 2440mm high. Special sizes are available on request.

Certified in compliance with EN 179 with suitability for timber doors up to FD120 and metal doors FD120/FD240.

Indicate the required finish when ordering.

Exidor 2-off push bar panic vertical Pullman latches for non-rebated double doorsets that is simple to install, and supplied with timber or steel door keeps and fixings.

The unit is operated by pushing the bar down into the door face to retract the latch bolts, releasing the bar returns the latch bolts to the rest position. Standard-size panic bolts are suitable for single doors up to 2440mm high. Special sizes are available on request.

Certified in compliance with EN 179 with suitability for timber doors up to FD120 and metal doors FD120/FD240. Indicate the required finish when ordering.

Exidor 2-off push bar panic vertical Pullman latches for non-rebated double doorsets that is simple to install, and supplied with timber or steel door keeps and fixings.

The unit is operated by pushing the bar down into the door face to retract the latch bolts, releasing the bar returns the latch bolts to the rest position.

Standard-size panic bolts are suitable for single doors up to 2440mm high. Special sizes are available on request.

Certified in compliance with EN 179 with suitability for timber doors up to FD120 and metal doors FD120/FD240. Indicate the required finish when ordering.

Exidor push bar panic bar set for rebated double doors comprising lath unit for active leaves and vertical Pullman latch for inactive leaves that is simple to install, supplied with timber or steel door keeps and fixings.

The unit is operated by pushing the bar down into the door face to retract the latch bolts, releasing the bar returns the latch bolts to the rest position.

Standard size panic bolts are suitable for single doors up to 1220mm wide and 2440mm high (special sizes are available on request).

Certified in compliance to EN 1125 with suitability for use on timber doors up to FD120 as well as metal doors FD120/FD240. Indicate required finish when ordering.